Unpowered Spindle Assembly B10 Drill Chuck Set Table Bench Drill Saw DIY Lathe

Description

Machifit No Power Spindle Assembly Small Lathe Accessories B10 Drill Chuck Set
US STOCK, FREE SHIPPING
Specification:
Product Name
Drill Chuck Set
Brand
Machifit
Cutting ability
Unpowered spindle
Cutting depth
10 (mm)
Saw blade size/diameter
90 * 10 (mm)
No load speed
10000 (RPM)
Scope of application
Making small saw
Power type
No power
Quantity
1 Set x Drill Chuck Set
Features:
The shipper and the synchronous wheel are equipped with the gasket isolation of 1mm to lock tightly.
- The rotation is smooth and without phase grinding, and the accuracy is good.
- No power spindle, precision machining by grinding machine, precision of 0.005mm, that is, a high-precision spindle with less than one wire.
- DIY bench drill, bench mill, table saw and so on.
- Through the connecting rod, the shaft sleeve link is eliminated, and the drill clamp is installed directly, so the accuracy is higher.
- The non-powered spindle (Mohs drill chuck connecting rod) is precision machined with a grinding machine with an accuracy of 0.005MM. Can be used to make bench drills, bench mills, table saws, etc.
Installation tips:
1. Pay attention to the mounting direction of the bearing, and carefully look at the description diagram or video.
2. Do not damage the bearing blindly. Patience and carefulness are the key points of mechanical work.
3. Various methods: to activate the brain and complete the assembly.
4. The sliding block and the contact surface of the synchronous wheel shall be separated by gasket to prevent phase grinding.The gasket is small. Don't lose it.
Package Included:
1 Pc x Drill chuck connecting rod
1 Pc x XL20T 10mm hole synchronization wheel
1 Pc x 10mm hole slider (including 2 bearings)
1 Pc x 0.6-6mm B10 Drill Chuck
1 Pc x M10 Shaft sleeve
(Including shaft socket wrench, synchronous wheel wrench, drill clamp key)